SKU: DTF-Film-19G

G Series - DTF Film 19" x 328' (48cm x 100m)

$189.00

Product videos

Description

New Formula

19" G Series Hot Peel DTF Film (Double-Sided)

G Series hot peel film cut to 19 inches and built for the ColDesi 19H2 DTF printer and shaker system. This is ColDesi's newest hot peel coating, so it powders evenly, transfers cleanly, and holds up through long production runs. The double-sided coating is what sets it apart from basic film.

Width	19" (48 cm)
Roll Length	328 ft (100 m)
Thickness	70 microns (0.07 mm)
Peel	Hot peel (cold peel also works)
Coating	Double-sided, anti-slip
Made For	ColDesi 19H2 DTF printer and shaker system

Why Double-Sided Film

The anti-slip backing gives the film better grip while it prints, so it stays stable instead of sliding or scratching. That makes for a smoother run, sharper prints, and less film in the scrap pile, which adds up to steadier production and more pieces out the door.

How to Press It

Temperature	300°F
First Press	10 seconds, firm pressure (setting 7)
Finishing Press	5 seconds

Print your design mirrored, with the white ink laid down on the surface.
Set the garment on the press, then position the transfer on top with the image facing up and reading correctly.
Press at 300°F for 10 seconds with firm pressure.
Peel. For a hot or warm peel, start at the corner with the heaviest ink and pull the film off in one smooth motion. For a cold peel, take the garment off the press, let it cool all the way, then remove the film.
Finish by setting the garment back on the press, covering the design with a finishing or Teflon sheet, and pressing for another 5 seconds.

Settings are a starting point. Fine-tune time, temperature, and pressure to suit your press and garment.