Free Shipping & Ground Shipping available in USA only, not in AK or HI.
Loading...
DTG Poly PreTreat 8oz
Regular price
$23.49
Unit price
/
Unavailable
Description
Description
DTG Light Garment Poly PreTreat is a fabric pre-treatment,
specially formulated to work with water-based textile inks to allow you
to print on polyester* and other poly blend* materials.
Mixing Instructions:
100% polyester = Use full strength from the bottle.
50/50% polyester blends = Dilute Poly Pretreat with same amount of distilled water.
Simply spray the Poly Pretreat on the fabric, dry with your heat press or tunnel dryer at 300 degrees F for 30 seconds. Print as you would for any other garment, then cure the inks for 90 seconds at same temperature.
Mixing Instructions:
100% polyester = Use full strength from the bottle.
50/50% polyester blends = Dilute Poly Pretreat with same amount of distilled water.
Simply spray the Poly Pretreat on the fabric, dry with your heat press or tunnel dryer at 300 degrees F for 30 seconds. Print as you would for any other garment, then cure the inks for 90 seconds at same temperature.
IMPORTANT: This Pretreat is to be used on light colored garments when not using white ink. Not to be used with the White Ink solution.
Use White Ink PreTreatment if printing with the White Ink on cotton garments.
*We highly recommend wash testing on all printed poly and poly blend garments prior to selling as composition of garments can vary.
