TRANSGLOSS INSTRUCTIONS
FOR CREATING A GLOSSY FINISH.... ON OUR DIGITAL TRANSFERS (InkJet or Laser Transfers)
After printing your transfer on one of our heat transfer papers.... (ie: Transfer Jet, PremiumPlus, or High Temp Laser) You will apply this TransGloss product to the pre-printed transfer after the printed transfer is on the shirt. NOTES: 1) YOU DO NOT PRINT ON THIS TRANsGLOSS PRODUCT! 2) A conventional home iron will not provide a satisfactory image transfer. You must use a heat press. First follow the directions that come with the digital heat transfer paper (ie: TransferJet, PremiumPlus, or High Temp Laser) that you are going to print on. Then follow the rest of the below instructions: Applying TransGloss: (After applying your printed transfer to the shirt)- Place TransGloss paper (gloss side facing down) on top of the printed transfer.
- Set heat press to medium pressure (approx. 40 Ibs. of pressure). Press should snap closed firmly.
- Transfer at 360°F for 5-8 seconds.
- Peel COLD!
- Turn garment inside out. Machine wash in warm or cold water.
- Do not use softener or bleach.
- Tumble dry on low setting. Do not dry clean!
- To brighten image on fabric after washing, press with an iron or heat press on medium setting. Make sure you cover image with Teflon sheet to protect iron/heat press.
