Commercial Embroidery Supplies: the Real Cost of Quality

In commercial embroidery, when it comes to quality, you can still use the best supplies and keep your reputation for being frugal. Saving a few pennies on cheap commercial embroidery supplies may wind up costing more in the end.

When calculating costs of commercial embroidery, supplies are always an important question. There is a natural tendency for some embroidery shops to use only the least expensive supplies. Searching for the best bargains on thread, bobbins, and backing is one easy way for a shop to save a little money.

However, when performance suffers from broken threads, puckering and other quality issues, is saving a few pennies worth the effort? Are you really saving by going cheap?

Although there is nothing wrong with being frugal (after all, we are talking about profits), you still can get the best supplies without hurting your bottom line. When you crunch the numbers on basic supplies, you can find out the true costs of commercial embroidery. With a little smart shopping, the best can be certainly within reach of any budget.

Commercial Embroidery Threads: The Best Is Affordable!

Thread is the foundation of commercial embroidery, and it is often the least expensive part of the process. Most high-quality threads come in 5,500-yard cones and costs around $7-$13 per cone. Each cone will produce about 1 million stitches.

Let's take a closer look below.

Of course, for large production runs, purchasing cones is the best value, but having a few spools on hand should not dramatically affect production costs. What can start pushing up costs is when you run out of thread in the middle of an order, and having to buy a few emergency spools.

It is never fun to run out of thread in the middle of a project. On top of lost production times, going to a local retail fabric store to pick up thread, which usually comes in 1,100-yard cones, will cost $5-$6 each. At 200,000 stitches, you will be paying $0.03 per thousand stitches. Not a massive obstacle to get the quality you need. Specialty threads can certainly affect your budget, especially when used in large designs.

Some manufacturers charge $20 or more for a cone of metallic thread, at $.06 for 1000 stitches! For a heavy jacket back design needing 20,000 stitches or more, that could add about $1.20 per unit.

With the right supplier, you can give your commercial embroidery customers the best polyester threads, with superior strength and less breakage, and still maintain your reputation for being frugal. You can create remarkable commercial embroidery and remain competitive in your prices.

The Best Bobbins Will Fit Any Budget!

 

A Great Backing Is Still a Good Deal!

 

Of all your commercial embroidery supplies, the backing will be the most expensive. However, putting it into context, the cost becomes less of a factor overall. The costs of pre-cut stabilizing squares are straightforward to calculate by just dividing the total price by the piece count.

 

Add the cost of quality thread, bobbins and backing for a typical 7000-stitch left-chest logo runs around $0.16 per design, using high-quality thread and backing.

The bottom line is that you do not need to skimp on supplies. It is always good to get an excellent deal on a thread and backing, but buying cheap supplies will probably cost you more in the end.

Cheap threads break more often and prompt frequent tensioning issues. Saving a couple of dollars on a cone (less than a penny for every thousand stitches) will cost much more in lost productivity and labor costs.

Skimping on supplies will not do you any favors, especially if you do not buy with quality in mind. In commercial embroidery, even the best is not expensive to start with!